Oak Spencer

SKU: Select from the options below
From (inc VAT)
£312.60

Key features

  • Material: Oak
  • Application: Internal
  • Fire Rating: Non-Fire Door
  • Glazing Type: Pre Glazed
  • Finish Type: Pre-Finished
  • Core: Solid Core
  • Brand: JB Kind

About this door

The Oak Spencer is a stylish oak glazed door with a great looking walnut inlay. An unfussy flush door with elegant inlay and glazing aperture, this door offers a different look to your run of the mill entranceway.

A single large glazing aperture in the centre of the door adds visual interest, with a raised beading perfectly framing the glass.

Manufactured with a semi-solid engineered core, these doors have a weighty feel with 10mm solid oak lippings.

This range of doors also features a solid panelled and fire door version to give your home a consistent look throughout.

Glazing

These doors are pre-glazed with a clear safety glass, allowing light to pass between rooms and creating a great feature. 

Maximum adjustment (top):
10mm
Maximum adjustment (bottom):
10mm
Maximum adjustment (left):
6mm
Maximum adjustment (right):
6mm

Supplied pre-finished with a clear satin lacquer, these doors are factory finished. This requires no further decorating on site and creates a fantastic look which really does show off the quality of the oak veneer.

The correct storage, fitting and finishing of your new door/s are very important factors in getting the best out of your purchase.

Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.

If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk. 

These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.

The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.

They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!

If there is anything you are unsure of, our friendly team are here to help.

Give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.

You may need