Walnut Kenworthy Shaker Pre-Finished

SKU: DDINWAKENWORTHYSHAKER35MMPF

£184.95 (inc vat)

Key Features

  • Thickness: 35mm

  • Material: Engineered Walnut.

  • Finish: Pre-Finished with a clear satin lacquer

  • Construction: Dowelled.

About this door

These Walnut Kenworthy Shaker Pre-Finished doors have a very substantial look & feel to them. This is partly down to much wider stiles & rails than found on other, similar looking products.These internal doors also benefit from the use of a high quality crown cut veneer which really does give the door a quality aura.

Please Note: Due to the logistics of supply on these doors, lead times are currently between 2 and 4 weeks.

Finishing

Supplied Pre-finished, Meaning the doors will be treated with three applications of a clear, satin laquer. meaning no further decorating is required.This treatment leaves a super smooth, satin look which really does show off the quality of the veneer.

The correct storage, fitting and finishing of your new door/s are very important factors in getting the best out of your purchase.

We would always recommend reading our Door Care information which can be viewed by Clicking Here, along with any additional manufacturers documentation supplied with the door itself.

If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.

Things we thought you may need to know!

These doors are constructed with solid oak 12mm lipping along the long edges and 6mm lipping on the top and bottom of the doors which means they look just like solid oak doors but are far more eco friendly.

These doors are manufactured using LVL (Laminated Veneered Lumber). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources. The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together. They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are; The door has a much more uniform look (no mismatched colours/panels, everything matches), It is far more unlikely to twist, split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more Eco friendly!

If you have any other questions, please feel free to contact us. We are here to help!