Oak 4 Light Stable - Ready to Glaze
- Material: Oak
- Application: External
- Fire Rating: Non-Fire Door
- Glazing Type: Ready To Glaze
- Finish Type: Ready to finish
About this door
The Oak 4 light Stable ready to glaze is manufactured from solid hardwood which is generously faced and lipped with real oak using an engineered construction to aid stability. Suitable for inward opening applications only.
Various glass options are available and these doors will accept a 4/6/4 cavity double glazed unit.
Things we thought you may need to know!
It is an unfortunate fact that exterior Oak doors and frames, from whichever supplier, are not suitable for exposure to direct rain and hot sun and therefore must be sheltered in some form, a porch or canopy perhaps. These doors or frames are eminently suitable for exterior use, but with this pre-condition to validate any guarantee. If you have any other questions, please feel free to contact us. We are here to help!
Supplied unfinished, these doors are able to take a stain or paint finish. A range of products would be suitable, including Impranol, which is available from the "Stains, Paints and Finishes" section of our website.
The correct storage, fitting and finishing of your new doors are very important factors in getting the best out of your purchase.
We would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturers documentation supplied with the door itself.
If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at firstname.lastname@example.org.
These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.
The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.
They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!