Oak Winchester Part L
- Material: Oak
- Application: External
- Fire Rating: Non-Fire Door
- Glazing Type: Pre Glazed
- Finish Type: Ready to finish
- Brand: LPD Doors
About this door
The Oak Winchester Part L Glazed External Door will make your entranceway inviting, cosy and traditional in design. With part obscure double glazing and raised mouldings on one side this door has an added visual depth.
The Winchester is part of a range purposely designed to satisfy the trend in improving the insulation and energy efficiency of homes and help combat increasing energy bills.
Each of these models has been independently tested and certified as achieving full Part L compliance.
This door is supplied pre-glazed with an attractive feature, part obscure, double glazed unit. This glazing is a unique and attractive way to let light into your home.
Supplied unfinished, these doors are able to take a stain or paint finish. A range of products would be suitable, including Impranol, which is available from the "Stains, Paints and Finishes" section of our website.
The correct storage, fitting and finishing of your new doors are very important factors in getting the best out of your purchase.
Please always avoid the use of water-based finishing products as this may cause the door to bow, warp or delaminate. Using these types of products will invalidate your guarantee.
Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.
If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at firstname.lastname@example.org.
These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.
The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.
They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!