Glazed GO3 RW Oak Flush FD30 Fire Door

From (inc VAT)

Key features

  • Material: Oak
  • Application: Internal
  • Fire Rating: FD30 Fire Door
  • Glazing Type: Ready To Glaze
  • Finish Type: Pre-Finished

About this door

The GO3 Oak Flush FD30 Fire Doors are an incredibly popular choice where cost, practicality and simplicity are paramount.

Often used in commercial applications, these simple, yet functional glazed fire doors are a great choice for a range of purposes.

As a pre-finished door, the Oak grain is fantastically showcased with a clear lacquer.

As a natural product, grain patterns between individual door leaves will vary due to the nature of timber.

This is part of the visual interest and natural beauty of timber and is not considered a defect. This means that whilst the doors will compliment each other, they are not guaranteed to be a close match.

This door features two 150mm x 700mm glazing apertures towards one side of the door, these doors are supplied either unglazed with mitred and pinned beading or with an option of factory pre-glazing, in accordance with BWF specifications. If a fire certificate is required, these doors must be factory glazed.

These pre-glazed internal fire doors offer 30 minutes of protection when installed in accordance with the instructions/compliance with the fire certificate.

These doors are supplied either unglazed (supplied with mitred and pinned beading) or with an option of factory pre-glazing in one of the following:

Georgian Wire Polished Plate factory glazing:

Clear Pyroguard factory glazing:

Sandblasted Georgian Wire Polished Plate factory glazing:

Satin Pyroguard factory glazing:

For the doors to meet BWF Certification (FD30 Regulations), a factory glazed option must be chosen.

Supplied pre-finished with a clear satin lacquer, these doors are factory finished. This requires no further decorating on site and creates a fantastic look which really does show off the quality of the oak veneer.

The correct storage, fitting and finishing of your new door/s are very important factors in getting the best out of your purchase.

Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.

If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at 

These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.

The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.

They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!

If there is anything you are unsure of, our friendly team are here to help.

Give us a call to discuss on 0114 2557800 or drop us an email at

You may need