White Primed Faro FD30 Fire Door

SKU: Select from the options below
From (inc VAT)
£964.47

Key features

  • Material: White
  • Application: Internal
  • Fire Rating: FD30 Fire Door
  • Glazing Type: Pre Glazed
  • Finish Type: Ready to finish
  • Brand: JB Kind

About this door

These Faro Fire Doors have a stylish 6 light square-top design with raised mouldings on both faces of the door. These doors have matching solid and glazed none fire door options.

Please note: these doors feature a raised beading and etched glass. This is different, but complementary to the matching single doors.
Please be aware of these differences.

Glazing

Pre-Glazed with Clear toughened Fire-Rated safety glass. Perfect for allowing the maximum amount of light to flow from room to room.

Please Note: The glass on these doors features an etching, to give the impression of a 6-light door on a single glass panel.

Complete your fire door with our range of fire door hardware or shop all internal fire doors.

Maximum adjustment (top):
0mm
Maximum adjustment (bottom):
10mm
Maximum adjustment (left):
2mm
Maximum adjustment (right):
2mm

This door is supplied pre-finished, with a factory-applied finishing product.

A fully finished door provides a consistent look whilst saving the time and hassle required to finish a door before hanging. 

The correct storage, fitting and finishing of your new door(s) are very important factors in getting the best out of your purchase and can often be a precursor to any guarantee.

Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.

If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.

These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.

The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.

They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!

If there is anything you are unsure of, our friendly team are here to help.

Give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.

You may need