Internal Oak Capri 3 Light
- Material: Oak
- Application: Internal
- Fire Rating: Non-Fire Door
- Glazing Type: Pre Glazed
- Finish Type: Pre-Finished
About this door
The Internal Oak Capri 3 Light is a sublime designer door boasting sleek, elegant lines and delicate yet distinctive features.
With crown cut cross directional faces, attractive double V-grooves are used to create an attractive and unique look, framing the central panel and offering a degree of seperation from the vertical grained 'stiles' of the door.
Three rectangular glazing panels in the center of the door provide an attractive method of allowing light to pass between rooms and give the door a fantastic contemporary look.
Also available in a non-fire door and a glazed door option, this door continues to stir the senses of discerning customers of contemporary interior design and would compliment any home.
These doors are supplied pre-glazed with a clear safety glass.
Supplied pre-finished with a clear satin lacquer, these doors are factory finished. This requires no further decorating on site and creates a fantastic look which really does show off the quality of the oak veneer.
The correct storage, fitting and finishing of your new door/s are very important factors in getting the best out of your purchase.
We would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturers documentation supplied with the door itself.
If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at firstname.lastname@example.org.
These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.
The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.
They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!