Internal Walnut SS 4 Light Iseo Glazed FD30 Fire Door

SKU: Select from the options below
From (inc VAT)
£739.95

Key features

  • Material: Walnut
  • Application: Internal
  • Fire Rating: FD30 Fire Door
  • Glazing Type: Pre Glazed
  • Finish Type: Pre-Finished

About this door

The Internal Walnut SS 4 Light Iseo Glazed Fire Door is a sublime designer door boasting sleek, elegant lines and delicate yet distinctive features. With 10mm solid lippings and a semi-solid core, these popular doors feature crown cut cross directional veneers and a quality clear satin factory finish.

In a tried and tested, popular contemporary design, these doors remain popular amongst fans of modern interior design. 

Five central panels in the face of the door are accented attractively by a V-groove detail, with four central glazing apertures featuring a clear flat fire rated glass. These glazing apertures are framed with raised mouldings and create a fantastic visual whilst allowing light to flood between rooms.

The Walnut Iseo range also offers solid panel and fire door options, allowing you to complete the look throughout the property.

Glazing

This door is supplied pre-glazed with clear flat fire rated glass.

Supplied pre-finished with a clear satin lacquer, these doors are factory finished. This requires no further decorating on site and creates a fantastic look which really does show off the quality of the walnut veneer.

The correct storage, fitting and finishing of your new door/s are very important factors in getting the best out of your purchase.

We would always recommend reading our Door Care information which can be viewed by Clicking Here, along with any additional manufacturers documentation supplied with the door itself.

If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.

These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.

The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.

They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!

If there is anything you are unsure of, our friendly team are here to help.

Give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.

You may need