Oak Oslo Clear Glazed
- Material: Oak
- Application: External
- Glazing Type: Clear Safety Double Glazing
- Finish Type: Ready to finish
- Brand: PM Mendes
About this door
The Oak Oslo Clear Glazed External Door is a stunning example from our collection of contemporary external doors. Ideal for an entrance door of a modern home, this door will create a welcoming and a modern-looking entrance to your property.
The smooth lines of this door will bring an understated elegance to your property.
A double glazed clear glass unit adds interest to the door and brings light into the home.
Supplied unfinished, these doors are able to take a stain or paint finish. A range of products would be suitable, including Impranol, which is available from the "Stains, Paints and Finishes" section of our website.
The correct storage, fitting and finishing of your new doors are very important factors in getting the best out of your purchase.
Please always avoid the use of water-based finishing products as this may cause the door to bow, warp or delaminate. Using these types of products will invalidate your guarantee.
Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.
If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at email@example.com.
These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.
The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.
They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!