Plywood Flush FD30 Fire Door
- Material: Plywood
- Application: Internal
- Fire Rating: FD30 Fire Door
- Finish Type: Ready to finish
About this door
The Plywood Flush FD30 Fire Door is an incredibly popular choice where cost, practicality, and simplicity are paramount.
Supplied as a paint grade, unfinished door, ready for finishing on-site, these doors have the ultimate flexibility in terms of matching with other doors or interior styles.
Rated FD30, this means our Plywood Flush FD30 Fire Door is fire resistant for 30 minutes, allowing time to safely escape in the event of a fire. Each fire rating is backed up by comprehensive independent testing and certifications to ensure FD30 doors perform as expected.
A large range of complementary non-fire door and glazed fire door options are also available.
Things we thought you should know!
The maximum you can trim from these doors is 3mm from the left and right side - 5mm from the bottom and 0mm from the top. Any more than this will invalidate the fire certificate.
Shop all Internal Fire Doors
On this product, there is an option to have the door made to a custom size. There is an additional charge for this service (see size dropdown box for details).
The maximum dimensions we can offer would be 915mm (36") x 2040mm (80 ¼"). Anything outside of these measurements may require an additional charge or in some cases may not be able to be manufactured, please call us on 01142557800 before placing your order.
Lead times for the manufacture of custom sized products are approximately six to eight weeks.
Please be aware that during certain times of the year, such as Christmas, festive and religious periods, this lead time may increase.
Supplied unfinished, these doors are able to take a paint finish.
The correct storage, fitting, and finishing of your new doors are very important factors in getting the best out of your purchase.
We would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.
These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.
The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.
They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!