Vision Oak 4 Light Clear Glazed with Walnut Inlay

SKU: Select from the options below
From (inc VAT)

Key features

  • Material: Oak
  • Application: Internal
  • Fire Rating: Non-Fire Door
  • Glazing Type: Pre Glazed
  • Finish Type: Pre-Finished

About this door

The Vision Oak 4 Light Clear Glazed with Walnut Inlay is a fantastic contemporary alternative to a standard oak flush door.

Four glazing apertures, pre-glazed with clear safety glass, allow light to flood between rooms and add great visual interest to the door. Contemporary raised mouldings surround each glass aperture.

Combining a high quality finish with full height vertical inlays, the attractive oak and walnut detail really does give the door the feeling of a premium product. Supplied with a factory finished clear satin lacquer, this door is ready to enhance your property and because a talking point amongst your friends and family.

With complimentary non-fire door and glazed door options, this range allows you to complete the look throughout the home.


These doors are supplied pre-glazed with clear flat safety glass.

George Orr
5 out of 5

Supplied pre-finished with a clear satin lacquer, these doors are factory finished. This requires no further decorating on site and creates a fantastic look which really does show off the quality of the oak veneer.

The correct storage, fitting and finishing of your new door/s are very important factors in getting the best out of your purchase.

We would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturers documentation supplied with the door itself.

If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at 

These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.

The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.

They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!

If there is anything you are unsure of, our friendly team are here to help.

Give us a call to discuss on 0114 2557800 or drop us an email at

You may need