GO2 Paint Grade Flush FD30 Fire Door Pairs
- Material: White
- Application: Internal
- Fire Rating: FD30 Fire Door
- Glazing Type: Ready To Glaze
- Finish Type: Ready to finish
- Rebate: Square Meeting Stiles
About this door
The GO2 Paint Grade Plus (PGP) Flush FD30 Fire Door Pairs are an incredibly popular choice where cost, practicality, and simplicity are paramount.
Supplied as a paint grade, minimalistic unfinished door, ready for finishing on-site, these doors have the ultimate flexibility in terms of matching with other doors or interior styles. Reduce decorating time and costs, this factory-primed door boasts a high-density smooth surface; ideal for spray painting, or other final finishing, to get the required look.
An unfussy door, simply flush without any kind of panel detail, this door has a huge range of uses.
Rated FD30, this means our PGP Flush FD30 Fire Door is fire resistant for 30 minutes, allowing time to escape in the event of a fire safely. Each fire rating is backed up by comprehensive independent testing and certifications to ensure FD30 doors perform as expected.
A 450mm x 700mm glazing aperture in the top center of the door, these doors are supplied either unglazed with mitred and pinned beading or with an option of factory pre-glazing, in accordance with BWF specifications. If a fire certificate is required, these doors must be factory glazed.
A large range of complementary non-fire door and glazed fire door options are also available.
Things we thought you should know!
The maximum you can trim from these doors is 3mm from the left and right sides - 3mm from the bottom and nothing from the top. Any more than this will invalidate the fire certificate.
Supplied with square meeting stiles, these doors are routed and supplied with intumescent strips.
The glazing apertures feature a raised beading that protrudes from the face of the door.
Shop all Internal Fire Doors
These doors are supplied either unglazed (supplied with mitred and pinned beading) or with an option of factory pre-glazing in one of the following:
Georgian Wire Polished Plate factory glazing:
Clear Pyroguard factory glazing:
Sandblasted Georgian Wire Polished Plate factory glazing:
Satin Pyroguard factory glazing:
For the doors to meet BWF Certification (FD30 Regulations), a factory glazed option must be chosen.
Supplied unfinished, these doors are able to take a paint finish.
The correct storage, fitting, and finishing of your new doors are very important factors in getting the best out of your purchase.
Please always avoid the use of water-based finishing products as this may cause the door to bow, warp or delaminate. Using these types of products will invalidate your guarantee.
Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.