Hardwood Pattern GTP Pairs
- Material: Hardwood
- Application: External
- Glazing Type: Ready To Glaze
- Finish Type: Ready to finish
About this door
These Hardwood Pattern GTP Pairs would be an ideal solution for anyone who would like to open up a room and allow extra light to flow through from room to room. These doors are manufactured from kiln-dried red hardwood timber. Every effort is made to ensure that all timber used for our doors comes from well-managed forests where more trees are planted than harvested. All doors have beading cut, mitred and pinned. They come as 44mm thick and can be used internally or externally
Supplied ready to glaze with a range of glass options available, these doors will accept a 4/6/4 cavity double glazed unit.
Things we thought you may need to know!
Please Note: If purchasing glass, this may be supplied either temporarily glazed or packaged separately.
These doors are listed as the TOTAL size for the pair of doors rather than the size of each door leaf.
Supplied unfinished, these doors are able to take a stain or paint finish. A range of products would be suitable, including Impranol, which is available from the "Stains, Paints and Finishes" section of our website.
The correct storage, fitting, and finishing of your new doors are very important factors in getting the best out of your purchase.
We would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.
These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.
The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.
They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!