- Material: Oak
- Application: Internal
- Fire Rating: Non-Fire Door
- Finish Type: Pre-Finished
- Core: Hollow Core
About this door
The Oak Flush door is an incredibly popular choice where cost, practicality and simplicity are paramount.
As a pre-finished door, the Oak grain is fantastically showcased with a clear lacquer.
As a natural product, grain patterns between individual door leaves will vary due to the nature of timber.
This is part of the visual interest and natural beauty of timber and is not considered a defect. This means that whilst the doors will compliment each other, they are not guaranteed to be a close match.
If you are looking to use two of these doors as a pair or in close proximity whilst requiring a close match, there are more suitable options such as the Oak Portfolio Flush.
A large range of complementary fire door and glazed fire door options are available.
Supplied pre-finished with a clear satin lacquer, these doors are factory finished. This requires no further decorating on site and creates a fantastic look which really does show off the quality of the oak veneer.
The correct storage, fitting and finishing of your new door/s are very important factors in getting the best out of your purchase.
We would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturers documentation supplied with the door itself.
If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at firstname.lastname@example.org.
These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.
The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.
They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!